top of page

What's the Best Vaporizer for DMT Breakthroughs?

What is the best 'DMT pipe'?

Smoking NN-DMT can be the single most incredible experience. The process of doing it right, however, is rather complicated. You first may wonder what is the best pipe for DMT? In fact, you want to vaporize your substance instead of smoking it. It is a more effective method and easier on your lungs. However, there are numerous variables to consider.

This starts with picking the best device for your journey. To take some ballast off your shoulders we have summarized the best vaporizer for DMT. We compared electrical and manual ones. All have their unique pros and cons. Read further to find out which vaporizer is the fitting one for your needs.

Yocan Evolve:

The Yocan Evolve is a popular electrical vape pen that can effectively be used for DMT. Compared to other vaporizers it's quite an affordable option with a slim design.

  1. How to use Yocan Evolve for DMT:

  1. Screw the pen open and load the molecule into the ceramic donuts.

  2. Press the button and watch it melt for around 2 seconds.

  3. Screw everything back together.

  4. Exhale your lungs fully. Then take a slow but long and determine toke. Make it last for around 20 seconds, while you are switching between pressing the button and letting it go. Holding it for 2 seconds, then letting go for 1 second again while you smoke. Don’t miss out on this step.

  5. Hold the vapor if possible for at least 20 seconds in your lungs. It should not feel too harsh on your lungs if you have done the previous steps right.

  6. You should be transported to some interesting place, almost immediately after this.


  • Very affordable.

  • Easy to carry around with you.


  • Depending on charged batteries.

  • Chances to burn some spice.

  • Needing to purchase an extra ceramic donut.

  • Can't be used for changa

The Glass Vapor Genie:

The Glass Vapour Genie (GVG) is the grand master tool for DMT usage. Trusted by thousands of psychonauts around the world, this glass pipe is the only manual tool on our list. It requires some trial and error to master and perfect the technique, but once you’ve got it the GVG will be a reliable companion for your DMT adventures. Even though it requires a lighter for usage, your flame will never touch and burn your substance. Instead, it will heat the air inside the ceramic chamber. Quite an incredible experience to see the vapor coming towards you through the pipe while you inhale.

  1. How to use The Glass Vapor Genie for DMT:

  1. What you need is the GVG, your spice, and a good lighter. Preferably a powerful torch one.

  2. There's a screen in the glass. Squeeze in like 2 or 3 more of them.

  3. Place a metal liquid pad on top of the screens.

  4. Preheat the liquid pad for a couple of seconds. 

  5. Carefully scoop your substance on the hot liquid pad and let it pre-melt into the pad. 

  6. After, close the glass with the ceramic filter.

  7. Get yourself ready. Deep breaths. Meditative state. 

  8. Put the pipe on your lips and start inhaling very slowly while you hold the torch lighter slightly above the ceramic filter at an angle. Keep inhaling until the GVG is fully filled with vapor. 

  9. Exhale fully. Then take a full toke. Getting as much vapor in as you can. Hold it for 10-15 seconds. Completely exhale and repeat, while you continue to light the GVG. You have to move fast since the world around you is quickly changing. You should be able to clear all the vapor in 2-3 hits. If you are good, perhaps 1 big toke is enough. Try to hold your last toke in for as long as possible. 


  • The most proven device for DMT.

  • The manual usage can feel special and more ritualistic.

  • No batteries are needed.

  • Can be used for changa.

  • Vapor is clearly visible through the pipe.


  • The GVG has a learning curve. It takes some tries to do it right.

  • You will always need to have a good lighter by your side.

  • Rather big and fragile, not perfect for transport.

APX Volt:

The APX Volt is one of the most effective methods to vape DMT and is amongst the favorites of the DMT online communities.

  1. How to use APX Volt for DMT:

  1. Remove the mouthpiece and fill your cup with spice (I use 40mg)

  2. Turn the Volt on, and set it to 3.2 volts (for anything below 20mg I use 2.8 volts instead)

  3. Pre-melt your spice by tapping the button 3 or 4 times for a split second each time until you see the powder turn to liquid

  4. If you’re using the bubbler attachment, slot it onto your Volt, otherwise put the mouthpiece back on. I cover the end of the bubbler/mouthpiece with a finger so nothing can escape, and hold the button down for 5 seconds ((you’ll see the cup start to glow, that’s when you want to let go before it burns it)

  5. Fully empty your lungs, press the button, then slowly and deeply inhale for as long as you can. After 4 seconds, let go for 1 second, then press for 4, let go for 1. All whilst doing one long inhale. Repeat until you run out of lung space! Perhaps a second toke can be necessary.

  6. Hold your breath for as long as you can and enjoy the journey!

  7. You might need a couple of trials to get it right. 


  • Comes with everything you need.

  • Small and portable.


  • No temperature control.

  • Can't be used for changa


The E-Mesh is more of a do-it-yourself construction than a ready-to-use device. I will require some fiddly work from you to build it. However, once set up it is an extremely reliable and easy-to-use method to vape DMT.

How to use E-Mesh for DMT:

  1. Gather the required pieces to assemble the E-Mesh

  2. Required pieces; battery mod, battery mod mesh RDA, ss mesh sheet/roll, rechargeable battery, extended drip tip

  3. Cut the mesh strip shape into a T shape, and assemble the shape

  4. Change settings to tc-ss and set the temperature around 360-380F. hotter if you wish for a stronger smoke, but no higher than 400f or you will burn the spice

  5. Add spice on top of the mesh strip

  6. Press the vape button and inhale


  • Full breakthrough in one hit

  • Very smooth vapor on cooler settings, so excellent for those who don't smoke

  • No need to worry about a lighter

  • Uses all DMT, so none is wasted, and breakthrough on smaller doses


  • Assembly required

  • Must reload after a full hit

  • Cleaning required

  • Reports of some people not being able to put settings correctly

  • People may not expect to breakthrough in smaller does

  • Can't be used for changa

DIY DMT Vaporizers

You can also make your own DMT Vaporizer Cartridges (Vape Carts) with different concentration ratios and flavors. Ideal for more discreet administration; it looks like commercially available nicotine cartridges. The dosage can also be more easily controlled and weighing before each dose is not required. Typical ratios are 1:1 or 2:1 of DMT Spice to Electronic Cigarette Fluid (e-Liquid). It is simply a matter of gathering the right materials and ingredients - like baking an interdimensional cake!

The 3 main elements are

1. The Vape Juice;

2. The Cartridge;

3. The battery.

What’s in the Vape Juice?

The Vape Juice is an eLiquid base that contains the DMT crystals and some flavor. The eLiquid base consists of PG (Propylene Glycol), and VG (Vegetable Glycerin), at either a 70% PG/VG 30% or 50% PG/VG 50% (which is best is up to you - 50/50 has best-reported results). A Terpene for flavor can optionally be added to improve the unique taste of the molecule. It only takes ½ to 1 drop of flavoring per 1ml of Vape Juice depending on preference.

What are PG and VG?

Propylene Glycol (PG) is a non-toxic ingredient used as a flavoring carrier in food products, food coloring, and as an additive in various medicines.

Vegetable Glycerin (VG) is a non-toxic, sweet, thick, vegetable-based liquid which produces the vapor. A 100% VG base is very thick and hard to smoke effectively which is why a combined PG/VG blend is recommended.


The common 510 thread CCell Cartridge is often used, though one could use a larger tank if a different “Rig” (cartridge/battery combo) is being used. Focus on the quality of the coil, and size of the tank when selecting the right one for you. Non-absorbent tips are recommended (thus avoid wooden ones) in cases where the vape juice isn’t vaporizing 100%. The size tank depends on how much Vape Juice you want it to hold. Starting small allows you to experiment efficiently.

Math alert: Choose a .5ml or 1ml cart knowing that it will generally be filled with half spice and half e-Liquid. So a 1ml cart will hold 1ml of Vape Juice which will require .5mg spice, and .5ml of e-liquid to make.

The Battery

There are a variety of commercially available batteries to choose from and most can be found at your local smoke/vape shops (or online). The functional requirements to look for is the cartridge thread type (510 in this use case), and the power output (shown in watts or volts). A typical “pen” battery will not have the power needed to reach the right temperature.

Materials you will need:

  • A Scale to measure your ingredients.

  • A Syringe with a ~10mm diameter flat tip. This is used to mix and transfer the Vape Juice. You can find e-Vape Kits with the right parts online.

  • A small Glass Vessel with a water-tight lid that can be warmed by submerging it in hot water.

The Objective is to warm the measured e-liquid so that the measured Spice will dissolve into the solution. After you combine the ingredients in the glass vessel remove and stir the e-liquid/spice together - and repeat. It takes a bit of trial and error to submerge the glass vessel in hot water, but you will get it done. The Vape Juice should be mostly clear with a water-like consistency. It may take several cycles, so be patient.

Then, carefully draw the Vape Juice into the syringe, and squeeze into the cartridge. There may be bubbles, but at this point, the Juice should be ready to go! Attach to the battery and start in the middle range for your initial test.

Remember: Don’t press the button and simply breathe in. Your suction draws the Vape Juice into the CCell coil. Depressing the battery button heats the coil, and you will suck the vapor into your lungs. With 1 or 2 long, deep inhales; the fabric of fractals and body high floods in. With 3 or 4 - you’ll be on your way to a breakthrough. Happy Travels!


  • Very Discreet.

  • Smooth cool vapor is excellent for those who don't smoke.

  • Open flame/lighter not required.

  • Control overdosing (excellent for microdosing).

  • Tastes Great!


  • Takes effort to mix the Vape Juice in advance.

  • Not efficient to make (some spice is wasted during the process).

  • Must charge your battery.

  • Breakthroughs take 3-4 hits (depending on the ratio, and the traveler’s breathing technique).

The Final Verdict

Choosing the best vaporizer for DMT depends on your preferences, experience level, and the kind of experience you seek. Each option has its pros and cons and in order to pick the best vaporizer for DMT, it's always best to evaluate every aspect of the device.

Even if you decide to build your own custom DIY DMT Vaporizer, the key is finding a method that aligns with your preferences and provides a safe and transformative experience that you can enjoy.


Discover our psychedelicproducts

bottom of page